Search results

  1. kendawg69a

    EGT Differences

    Ive checked temps with ir laser and they were consistant all around engine at 250°f Sent from my LGMS345 using Tapatalk
  2. kendawg69a

    Excessively long warm up?vibrations!!?

    2yr old disintegrating rubber/cloth fuel line was the intrusion Sent from my LGMS345 using Tapatalk
  3. kendawg69a

    Excessively long warm up?vibrations!!?

    Hah well if its low on oil it sounds like shit. 10 qrts is not my cup of tea...any ways found the rotted line going to cylinder 8 thank u all for the help and other awesomeness now onto a 29 dollar heater core that is leaking rust through my carpet? W/ ac... can i just change core or do i need...
  4. kendawg69a

    Excessively long warm up?vibrations!!?

    Sorry for off topic just worried about heat core now since iv had time to think. Sent from my LGMS345 using Tapatalk
  5. kendawg69a

    Excessively long warm up?vibrations!!?

    With turbo and powerstroke filter i use 12.5-13 qrts in 7.3 or its too noisy;\ Sent from my LGMS345 using Tapatalk
  6. kendawg69a

    Excessively long warm up?vibrations!!?

    While im waiting to figure this out i also need a heater core? No ac or heat in cab is this deffinite just a heater core or blower motor problem? How much coolant loss am i expecting for replacement? Hoses are both just warm when it was running is it possible a flush could fix or recommend...
  7. kendawg69a

    Excessively long warm up?vibrations!!?

    Glow plugs made startup so much nicer but it still is stalling out. Got rid of white smoke for most part. Isnt a rough start like most air purges. Has weak sputter and wants to start every 10 minutes or so. Sent from my LGMS345 using Tapatalk
  8. kendawg69a

    Excessively long warm up?vibrations!!?

    Still had fuel at injectors while at 1/4 tank but i cant afford to take chances with this cold weather making it hard on batterys so i put 10gal in so i could eliminate that being questionable. New rubber to lift pump. Would love to have original pump built and put back on truck cause its mine...
  9. kendawg69a

    Excessively long warm up?vibrations!!?

    Have fuel at schrader valve. Thanks for replys.i Was worried if i open all 8 or even just 1 ,that air would get right back in if the motor wasn't running. 8 squirting fuel injectors is not going to be a good time if this thing decides to stay running. I should have been able to just purge the...
  10. kendawg69a

    Excessively long warm up?vibrations!!?

    Purging 1 injector at a time but does someone have to be on the key? Or can i just fill up the tank Sent from my LGMS345 using Tapatalk
  11. kendawg69a

    Excessively long warm up?vibrations!!?

    Ran tank kinda low when this all happened. Was at 1/4 tank but its halfway now. Think ill need to fill tank completely or just crack open all of the injectors 1 at a time? Cracking open these injectors without engine running am i wasting my time? Sent from my LGMS345 using Tapatalk
  12. kendawg69a

    Excessively long warm up?vibrations!!?

    Didnt know there was a plug in valley any ideas on what to do with it? Sent from my LGMS345 using Tapatalk
  13. kendawg69a

    Excessively long warm up?vibrations!!?

    Truck is starting fine. Just stalls right out. Leave a few injector lines open will keep it running? Sent from my LGMS345 using Tapatalk
  14. kendawg69a

    Excessively long warm up?vibrations!!?

    Last it was running the injection line backed out hanging by a thread filling the valley full of fuel. Noticed big puddle omw to work when i turned in at d&d so i brought it back home looking underneath everywhere for this constant steady drip till i popped the hood to see an easy fix. Been...
  15. kendawg69a

    Excessively long warm up?vibrations!!?

    Was describing the shudder from previous experience with lift pump or cdr whatever it was. oil was changed soon after. Have about 10k on new lift pump. but noticed oil level fluctuating low first now it is past the do not add mark. Have always put 13 quarts 15 40w. Some how it has fuel in oil...
  16. kendawg69a

    Excessively long warm up?vibrations!!?

    No fuel outve shrader Sent from my LGMS345 using Tapatalk
  17. kendawg69a

    Excessively long warm up?vibrations!!?

    Needs new heater core? Thanks for reply Sent from my LGMS345 using Tapatalk
  18. kendawg69a

    Excessively long warm up?vibrations!!?

    No heat.at all.or ac oh yeah forgot that part too. Truck wont start and stay running after lots of cranking. Fires up revs high for a sec then stalls right out. Sent from my LGMS345 using Tapatalk
  19. kendawg69a

    Excessively long warm up?vibrations!!?

    Have factory turbo 94 idi that is taking quite awhile to warm up it seems, ever since it started shaking/ bad vibrations on high idle till it drops after warming up a bit. Had 3 things that caused these bad vibrations. Lift pump died pumping diesel in crank, still rattled the whole truck after i...
  20. kendawg69a

    Heavy Crap

    U krazys must love driving in reverse careful with all that weight lol Sent from my LGMS345 using Tapatalk
  21. kendawg69a

    Grey white smoke no start?

    Sorry i discovered bio after previous post but i beleve i learned about glow plugs in the stickys. Something that the pre injection heat can disippate as fast as it is can aquire the necessary 477°+ to up. So is combustion still possible without glowplugs and be able to keep motor running? Yay...
  22. kendawg69a

    Grey white smoke no start?

    Have bio lists truck year but no signature option Sent from my LGMS345 using Tapatalk
  23. kendawg69a

    Grey white smoke no start?

    Always motorcraft and ive been trying to make a signature for awhile now lol Sent from my LGMS345 using Tapatalk
  24. kendawg69a

    Grey white smoke no start?

    Still hunting down cheap motorcraft glowplugs considering the weather sux and mine were working just fine b4 this fuel leak. Too much cranking/cycles kill glow plugs? Sent from my LGMS345 using Tapatalk
  25. kendawg69a

    Grey white smoke no start?

    Wts seems under 10 seconds b4 controller starts clicking Sent from my LGMS345 using Tapatalk

Latest posts

Forum statistics

Threads
91,338
Posts
1,130,594
Members
24,140
Latest member
placidoert

Members online

Total: 838 (members: 9, guests: 829)

Share this page

Top