Search results

  1. ADV

    NAPA Echlin Ignition vs Motorcraft Glow plug relay comparison - with pics

    The CCD push button glow plug setup is nice. Took the factory jack holder off the fender and mounted it in its place. Now to get it wired up
  2. ADV

    Rate my centrifuge setup

    Where did you get the water condenser? My setup could benefit from one of those.
  3. ADV

    Injector return line confusion...

    Dammit what happened?
  4. ADV

    Injector return line confusion...

    Wow that's a great looking engine!!
  5. ADV

    1993 f350 crew cab 4x4

    SOLD 1993 ford f350 crew cab 4x4 NA idi zf5 Aluminum return line caps, Stainless steel brake lines, Dynomax exhaust, Hydro booster brake upgrade with Fsuperduty master cylinder, autometer pyrometer and water temp guage, hypermax cowel intake. New u joints and carrier bearing...
  6. ADV

    911 diesel dead in Gilmer Texas need help

    All fixed and on the road. No fuel leaks and running well. Thanks again. Everyone
  7. ADV

    911 diesel dead in Gilmer Texas need help

    Instead of bypassing the return line he hooked a rubber line up to the 2 open posts on the fsv.... not sure what that will do but he said it's not leaking.
  8. ADV

    911 diesel dead in Gilmer Texas need help

    He got it running but only bypassed the supply line and left everything else hooked up. Oops. He just called again and it's leaking out of the fsv where the lines are off. So now he is bypassing the returns. But it's running for him Thanks for the help everyone
  9. ADV

    911 diesel dead in Gilmer Texas need help

    Fuel selector bypassed and now dead batteries
  10. ADV

    911 diesel dead in Gilmer Texas need help

    My dad just bought a 1991 f250 idi. Trying to drive it home to wisconsin. Itso dead along hwy 271 outside of Gilmer texas. It will run the filter dry and die. He replaced the lift pump and rubber line to the lift pump. He said if he sucks on the fuel supply line coming from the tank it done...
  11. ADV

    1991 f250 idi dead in Gilmer Texas need help

    My dad is stranded along side the road by Gilmer Texas with a 1991 f250 idi. Not getting fuel to the filter. New lift pump. Any one in the area?
  12. ADV

    Now I just need to get it home

    No I do not have an engine yet. Looking for a good runner
  13. ADV

    Now I just need to get it home

    Found the truck in fayetteville arkansas. It is now in theodosia Missouri. I like to check craigslist where relatives live. They are always willing to help out.
  14. ADV

    Now I just need to get it home

    He is actually in southern Missouri. The truck just happened to blow up in Arkansas.
  15. ADV

    Now I just need to get it home

    I have been looking around for a while for a southern crew cab. This 1993 from texas 4x4 idi zf5 with a 4 inch lift and 37 inch tires came up on craigslist. Conveniently about 100 miles south of where my uncle lives. He helped me out and went to check it out and picked it up for me. It's a...
  16. ADV

    Champion radiators SUCK!!!!

    The shop I took it to had it under water and pressure tested it. it's definitely leaking from the corner. The guy at the shop said that he sees this all the time a leak in the corner and it's just the shitty made over seas garbage. He also said he could get me a different one but he won't say...
  17. ADV

    Champion radiators SUCK!!!!

    I did have straight water in the truck for a short time after I put the 6.9 in. Did not have coolant at home and wanted to run it. Just drained and pulled the radiator a few weeks ago and everything sat empty. If this was caused by rust would that take out a radiator in a few weeks?
  18. ADV

    Champion radiators SUCK!!!!

    I was told the corners can't be fixed
  19. ADV

    Champion radiators SUCK!!!!

    Yes there is a warranty but I think I tossed the sales slip out with the box. And I would have to ship it back. I will never mail order a radiator again!!
  20. ADV

    Champion radiators SUCK!!!!

    Bought a new champion 4 core aluminum radiator this spring. Looked great maybe put about 10000 miles at most on the truck with the radiator. Pulled it out to do some work on the truck and just put it back in. Noticed steam coming from the radiator and could see just a slight drip. Pulled it...
  21. ADV

    BILLET ALUMINUM INJECTOR CAP PART 2

    When I started this project I wanted to see if I was able to make a solid aluminum cap that would not leak. At this time I am not interested in trying to make them any other way. Machine time on them is really not that long for what they are. I have not really been working on them recently, I...
  22. ADV

    Bad lifter how do I know?

    If I am into the engine this far how much more work would it be to put a cam in? Always wanted to try a torque cam.
  23. ADV

    Bad lifter how do I know?

    So if its collapsed the value will not open? Will this cause an oil pressure drop and running low oil pressure?
  24. ADV

    Bad lifter how do I know?

    Thanks for the help so far on this. But school me here a bit please. What causes them to stick? Is just replacing them good enough or do I need to do something to keep the new ones from sticking? And can I just pull the lifters and rockers out of my running 7.3 with a bad block?
  25. ADV

    Bad lifter how do I know?

    Can I replace the bushing bearing with the needle bearing lifters?

Latest posts

Forum statistics

Threads
91,262
Posts
1,129,483
Members
24,091
Latest member
freqencyheight

Members online

Total: 753 (members: 13, guests: 740)

Share this page

Top