Search results

  1. OldSchool101

    99-03

    Anyone got a red 99-03 F350 reg cab with a lighted visor on it, buying a new truck, love the lighted visors so far on previous trucks, just wondering what it would look like before i spend $350 for a new one, thanks
  2. OldSchool101

    Eating Tach sensors

    does anyone happen to know the part number for the sensor, possibly i can get it crossed somewhere i am currently looking for one too
  3. OldSchool101

    blocks

    I installed one inch custom blocks in the front of my 250, i used new bolts through the springs and block for the locating pin, ive had people tell me this is illegal, and they will fall off and what not, but ive had no problems, i dont understand how they will fall out when you still use the...
  4. OldSchool101

    Front end weight question???

    you need to remember that the 250s had weak front springs and terrible ball joints, so if they are stock, they will wear out, i understand people install plows and whatnot and within 2 or 3 winters the front ends are shot. I would try not to leave the crane on during transport.
  5. OldSchool101

    shake rattle and roll

    If you are running larger, wider tires, and they are getting lower on tread, they will hop across the road, i had this issue with my 92 like all the time with 33s on it and i put new tires on and never had the problem since, so before you stick alot of money in it, check your tread, also i think...
  6. OldSchool101

    hitch receiver with 8" drop bumper

    If its a " Mr. Pickup" bumper, i bought a Reese brand that would fit my year truck, either from Farm and Fleet or Tractor Supply, dont recall which, all i had to do was drill holes in my frame to mount it, I dont know about the weight, but thats what i did and it worked great!!!
  7. OldSchool101

    Front springs DONE! Gained 2 1/2 inches

    i never actually had it aligned after i did it, but my guess would be about about 7- 10 degrees off
  8. OldSchool101

    What coolant can i use

    I work at a Heavy duty truck shop and there have been plenty of times when the green EC antifreeze has come out due to making repairs, failures, etc. And the red ELC fleetguard has been put in, i thought i would be ok with it, but just checking first.
  9. OldSchool101

    What coolant can i use

    I was just wondering if i completely flushed my system if i could run the red or yellow ELC in my truck so i dont have to keep up with my DCA. Any suggestions, comments, or concerns to doing this???
  10. OldSchool101

    Front springs DONE! Gained 2 1/2 inches

    What year truck did you do the front add a leaf to and was it 250 or 350, and roughly how much did it cost you including the alignment, i have a 92 F250 that i added to the front to clear larger tires, and the camber is way off now, just wondering what you did???
  11. OldSchool101

    clutch bushing

    Just wondering what you guys are using for a clutch rod bushing on the clutch pedal??? Im sure someone has found something good to use other than the $10 bushing from Ford. The eyelet on the on the clutch rod is wore some, but the pin in the pedal is pretty good shape. Any suggestions or ideas...
  12. OldSchool101

    Starting Issue

    Not sure about starting after 6 hours, anytime it sits that longer than that is overnight, a day, a week, i have noticed though that it doesnt matter if it sits for 10 minutes or 2 hours it will do the same thing, sometimes 2 or 3 starts in a row, then it might start 10 times with no issues. I...
  13. OldSchool101

    Starting Issue

    not really sure what you mean by heat soak, or what it is for that matter, but i think im going to get a new lift pump, they really arent to expensive, i need to start somewhere.
  14. OldSchool101

    Starting Issue

    it did this when i first bought it 2 years ago, then went away, now it is back, all i have done was turn the pump up a little, never touched the timing
  15. OldSchool101

    Starting Issue

    I have this starting issue on my N/A 7.3. It starts perfectly first start of the day. After that(and not every time), i have to crank and crank on it to get it to start. I have changed filters multiple times, and my fuel filter light will flicker once in awhile, just wondering if i have a lift...
  16. OldSchool101

    glow plug issues

    glow plugs are the most common issue causing parts on an IDI, doesnt anyone have any tips, tricks, or suggestions that would help me from here on out with this issue???
  17. OldSchool101

    glow plug issues

    the wide strap gets hot when you are cycling the glow plugs, it cools down after you shut the key off, and also it just seems like the plugs arent working, you can check for 12 volts at each one of the plugs to see if they are working right?, Im just lost on why nothing seems to be working right
  18. OldSchool101

    glow plug issues

    ok i checked all the wires for shorts, are you saying i should check the glow plugs themselves for shorts too? and i dont think the plugs are heating, I let it cycle for about 7 or 8 seconds, and try to start it and it wont start, by the time i get back under the hood, everything seems cool to...
  19. OldSchool101

    glow plug issues

    i used Motorcraft ZD9 glow plugs, and which relay are you talking about, when i think relay i think a small black box with like 5 little spade connectors on it, so please explain to me a little better
  20. OldSchool101

    glow plug issues

    does anyone have anything else to add???
  21. OldSchool101

    glow plug issues

    everything is working fine though, it just doesnt shut off like its suppose to
  22. OldSchool101

    glow plug issues

    ok, so i got new ends put on my glow plug wires, and all new glow plugs, now the controller kicks on like its suppose to, but doesn't do the click click click when the plugs are warm enough. the controller starts smoking a little and the large wide metal strap on the controller is really hot...
  23. OldSchool101

    4" banks monster exhaust

    how close is this pipe to stock, does is come out close to straight out like the stock or towards the bumper???, and also what did it come off from, i got a 93 im looking for 4 inch tail pipe for, and im in la crosse everyday, if its not all cobbled, it maybe worth it to me, not sure on the...
  24. OldSchool101

    exhaust

    are all the aftermarker tail pipes pointed at like the rear bumper? i am looking for one that comes out 90 degrees to the box side like the stock, is there anything out there like that?
  25. OldSchool101

    exhaust

    Ok, so i looked up the tail pipe for a 94 to 97 PSD on Napas website, and it says its only 2 1/2, im not sure this is right, and i want bigger than that, without spending the 350 for the whole system, so a part number would be really helpful right now, anyone that could get me one that would be...

Latest posts

Forum statistics

Threads
91,376
Posts
1,131,382
Members
24,177
Latest member
RangerDanger

Members online

Total: 770 (members: 3, guests: 767)

Share this page

Top