Search results

  1. MidnightBlade

    2017 Oilburners Rally

    Must be an eastern pa thing, I've never had it!
  2. MidnightBlade

    2017 Oilburners Rally

    Well since everyone else is doing it I guess I may as well bring my ol girl and finish breaking her in lol
  3. MidnightBlade

    Injector Question and advice needed

    Just a tip when you get your Pyro installed, keep the probe in the manifold to get a true reading. I put mine as close as I could to cyl 8 reason being is if I remember correctly 6 and 8 fire one after the other so in theory that should be the hottest part of the manifold (someone correct me if...
  4. MidnightBlade

    2016 MOB Oilburners IDI rally.

    I guess I need to get started on the rally preperations real soon haha, deffinately looking forward to seeing what's gonna go on
  5. MidnightBlade

    2016 MOB Oilburners IDI rally.

    Glad I checked in on this, yins are right in my backyard this year!
  6. MidnightBlade

    More IDI PARTS... IM DOING A IDI TO PSD CONVERSION... IDI AND PPARTS FOR SALE

    Did you sell the turbo setup?
  7. MidnightBlade

    Well folks, Im back!

    Im not real sure to be honest, Ive never really tested it out
  8. MidnightBlade

    Well folks, Im back!

    Well, I have made some poor decisions recently...I decided id try out the Darkside cookoo I bought a 97 F250 HD ECLB with a 351 and an E4DOA. Needless to say not one of my better decisions lol. After leaking a 1/2 quart of oil a day and a gallon of coolant a week I've had enough!! Today was the...
  9. MidnightBlade

    Is a SMF bad for transmission?

    And here we go again reviving from the dead :angel: One major difference between heavy duty and light duty transmission is the gear cut. A heavy duty trans has straight cut gears, while the light duty has a helical cut gear (smoother I think IDK :dunno) Naturally the straight cut gear is going...
  10. MidnightBlade

    Tach reading low? (New sensor)

    When it acts up give the top of the dash a good hard slap and see if it straightens out for a bit or completely drops off. if it does either that tells you there is a bad ground/connection in the dash somewhere
  11. MidnightBlade

    Tach reading low? (New sensor)

    As far as the low tach reading at idle goes, check for a bad ground. Mine does the same thing but as soon as you get over 1000 it catches back up. Ive tried 3 brand new senders and they all did the same thing, so ground is the only option left.
  12. MidnightBlade

    1993 7.3 IDI factory turbo and a few extras $1200

    Yep, 4x4 ZF reverse needs rebuilt and it has a 460 bellhousing (just needs redrilled to fit an IDI). Id like to keep everything together and get rid of the whole bundle at once. And yes $1200 for the whole deal, I just need it gone and out of my way haha
  13. MidnightBlade

    1993 7.3 IDI factory turbo and a few extras $1200

    1993 7.3 IDI factory turbo engine 186k mi (complete), has up pipes, turbo, down pipe, airbox, and intake snail. I also have a ZF5 S-42 transmission, extra oil cooler, 2 clutches, 2 extra injection pumps, and a set of injectors. $1200 Sidman, PA
  14. MidnightBlade

    Stock Downpipe Wanted

    I have a stock one just laying around. PM me an offer and shipping
  15. MidnightBlade

    Stuck Glow plug

    Ok, thanks guys. i ended up soaking it in deep creep while i was at work and clamped on it with a pair of vise grips when i got back. Gave it a few twists and it pulled free.
  16. MidnightBlade

    Stuck Glow plug

    Well, in the process of getting my heads ready to experiment on, i found probably one of the worst things that couldve happened at this point. After the head was removed, i pulled the injectors and managed to get 3 of the glow plugs out in tact. The 4th however lost the threads and the little...
  17. MidnightBlade

    Any possible head work for a 7.3

    Ok, head is off. Going to the shop after i get some chow and doing some tests.
  18. MidnightBlade

    Any possible head work for a 7.3

    Oh, also forgot to ask, is there anything that can be done to the precombustion chanbers to improve burn or ignition?
  19. MidnightBlade

    Any possible head work for a 7.3

    Yep, any mods i do and any rezults i get will be posted on here for yins to see
  20. MidnightBlade

    Any possible head work for a 7.3

    I have access to a flowbench and all the tools required for the port and valve work, one of my good friends is alao a pro at port and machine work so this will be a very low cost build. Im also pondering the design of some custom intake and exhaust manifolds for better flow to and from the head...
  21. MidnightBlade

    Any possible head work for a 7.3

    What all is possible to do to the stock heads to get a few more ponies out of a 94 factory turbo? Set all costs aside, just looking for some insight on a future build ill be working on.
  22. MidnightBlade

    Running 2" wheel spacers?

    The rear studs are going to be too long, the front will be close
  23. MidnightBlade

    Running 2" wheel spacers?

    What could i use to get a nice cut?
  24. MidnightBlade

    Running 2" wheel spacers?

    I have the billet amuminum spacers with studs in them. Are the rear studs too long for the spacers to cover them completely. I have the full floating rear.
  25. MidnightBlade

    psd turbo setup

    Im going to be putting this project on the back burner for a bit until I get a few other projects finished up and get my car ready to rock and roll

Latest posts

Forum statistics

Threads
91,282
Posts
1,129,776
Members
24,099
Latest member
IDIBronco86

Members online

Total: 765 (members: 4, guests: 761)

Share this page

Top