Search results

  1. vn1500g3

    Injector Bore Seat Cleaning - Please HELP!

    Update: I have found an injector bore seat reaming tool and have complete installing my new injectors, IP, and glow plugs. Thank you all for your responses!
  2. vn1500g3

    Injector Bore Seat Cleaning - Please HELP!

    Rob, Yes, I get to Hot Spring probably once a year or so. Bought a set wheels for my Ford Ranger from a guy in Hot Springs last year.
  3. vn1500g3

    Injector Bore Seat Cleaning - Please HELP!

    I"m in the process of installing new injectors, glow plugs, and IP on my 93 F250. The old injectors are coming out in pieces due to massive amounts of carbon deposits in the injector bores. The previous own didn't know what he was doing when he installed a "New" set of injectors and didn't...
  4. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    My new to me 1993 F250 4 X 4 NA IDI. You can see whats left of my theft recovered F350 in the back ground. The F350 is a total loss.
  5. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    Thank you very much. I'll keep you in mind. I'll probably take you up on the timing meter. I'm looking at a replacement for my poor old broken and raped F350. I've got my eye on a 1993 F250 Extended Cab 4X4 that needs a new IP. I hope I can get a good deal on it.
  6. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    Stolen Truck I'm in Jacksonville Arkansas Yep, that's my engine. I did eventually get that back, however, the ass hole who stole the engine is still trying to sell my B&W Goose neck hitch. I called the sheriffs department to see if I could get it back, but since I have no way actually...
  7. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    Clear Fuel Bowl - UPDATE Well, the whole clear fuel bowl thing is pointless now. On December 3, 2013 my house burned down to the ground, then to add insult to injury, some low life, meth head, crack head, SOB stole my truck on December 7, 2013. The truck, as you'll see from the pictures is a...
  8. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    The pressure gage is working just fine. The liquid filled gage is a MUST if you mounting it in place where there will be lots of vibration.
  9. vn1500g3

    7.3 IDI Cold Start Issues

    Been Having Cold starting issues with my 7.3 IDI. This just recently started happening. When starting it blows clouds of white smoke for about 10 minutes, however, once the truck is fully warmed up it run just fine. Let it sit a few hours and it does it again. The You Tube video shows it just...
  10. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    Clear Fuel Bowl. It's a tight fit at the valve cover but it works great! The drain valve has to be clocked away from the valve cover or it interferes with the top of the valve cover. Pressure gage mounted right at the filter head! So here is the most recent shot of the filter with the...
  11. vn1500g3

    Aluminum return caps second truck

    So, did you press fit the hose barbs into the aluminium or did you machine it all as a single solid?
  12. vn1500g3

    Brand New CDR Valve From Ford, Pictures And Part #'s Here

    So the International part number is 1805319C1 for those who can find an International Harvester dealer.
  13. vn1500g3

    Brand New CDR Valve From Ford, Pictures And Part #'s Here

    For Grins and Giggles, how much was the CDR from Ford? Was it a special order part? Thank you for your time.
  14. vn1500g3

    Billet return caps

    Nothing like an ambitious machinist with a little time on his hands. Those caps look very nice! Outstanding work! I'm guessing you had some 6061-T6 ALU laying around not doing anything. I've thought about making a set myself for my IDI. They'll certainly last longer than the plastic ones...
  15. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    Clear Sediment bowl - Continued Here is the reason I chose to get a clear sediment bowl. This is from the last filter change before switching to the clear bowl. This is the kind of crap that's been coming out of my tank(s). The rear tank is brand new now, however, this junk is still...
  16. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    Do you happen to have any part numbers that we can look up for these sediment bowls? How about a picture or two? It would help those of us who would search for one. Thanks for the information! At this point, anything is better than the factory set-up. This is what I've found for the...
  17. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    Sure, the all in one filter is a great option and I've used them in the past, however, it's nice to be able to visually see any sedimentation / contamination, e.g. water in the fuel. The single biggest reason I started using the clear fuel bowls was due to contamination. The previous owner of...
  18. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    I'll get a picture of it on the filter in the next day or so.
  19. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    Racor Clear Fuel Bowl Replacment Yes, Here are the pictures
  20. vn1500g3

    Clear Fuel Bowl for your 6.9 or 7.3!

    Are you tired of not being able to tell if you have water or trash in bottom of your fuel bowl? By the time the WIF sensor tells you there is water in the fuel, you have a BUNCH of water in there. Here is the answer! Pick up a clear fuel bowl and replace the factory metal one. The part...
  21. vn1500g3

    7.3L IDI Glow Plug harness

    The only place to get the harnes is from International. Ford no longer services the factory engine harnes. I'll post the P/N in a while. I got mine from a guy on eBay. The problem is that the IH harnes is NOT the same as the Factory Ford Engine harnes. I ended up separating the GP harnes and...
  22. vn1500g3

    1993-94 IDI Turbo return line routing

    I'm installing the complete Turbo System from a 1994 IDI Turbo on my 92 IDI. I've gotten all the parts cleaned, inspected, painted and ready to install. Here's my question; The Factory Turbo IDI has a special injector return line routing. Could some some send me pictures, schematic, or a hand...

Latest posts

Forum statistics

Threads
91,376
Posts
1,131,382
Members
24,177
Latest member
RangerDanger

Members online

Total: 886 (members: 2, guests: 884)

Share this page

Top