Search results

  1. V

    6.9/7.3/7.3 Turbo parts

    do you have a down pipe for the turbo or did that go with it? how much for the fuel filter housing for the 7.3
  2. V

    Headlight lens cleaning on inside

    Thanks, I'd try anything right about now. I'll let ya know how it works.
  3. V

    Headlight lens cleaning on inside

    I think I may be confusing in my wording i sorry about that I meant how do you take them off of the truck. do I need to remove the grill, is there any hidden screws or bolts, I never did it before, and I'm not sure how to make sure they stay adjusted when I'm done. Sorry about that
  4. V

    Headlight lens cleaning on inside

    Was wondering how the heck the headlight lenses come off. My lenses have so much yellowish build up on the inside of the lens I can barely see anything at night. I was going to try and take them off to clean them for now because funds are a little tight. I can't seem to figure out how to do it...
  5. V

    Needing some parts?

    What would you charge for each?
  6. V

    Key Switch Bypass

    Hey yall, I was able to get the part at my local car quest, that guy is awesome. Piece of cake to replace what a relief. My batts no longer drain I'm not sure if that was the prob or not. but After I changed the switch I left the batts hooked up all night went out and it fired right up. Now I...
  7. V

    Key Switch Bypass

    And being thats a constant hot, that would explain why my batts are always going dead because the friggen thing is grounding, I couldn't figure it out for the life of me, It all makes sense now, Thanks TOW!
  8. V

    Key Switch Bypass

    I don't intend on driving or even trying to run the thing until I get the proper switch if I can even find one. I'm glad I asked otherwise I'd probably be one truck less, If not dead. Appreciate all the comments.
  9. V

    Key Switch Bypass

    Figued out this morning it's the slider switch. if I press it down all electrical works. I guess i'm gonna half to replace that. Hey TowCat, I didn't realize it was such a serious matter thanks for the heads up. Guess the riggen up will half to wait. Hey David Lee, it's a 91. I don't know how...
  10. V

    Key Switch Bypass

    Looked and can't find much. Was wondering if there was a way to bypass the key switch and just run a toggle for power and shut off. I have a push Button already for the start solenoid, and bypassed my GPC so I only need the key for initial power to fuel pump and to get power to GPC. My switch...
  11. V

    T-Stat Question

    I got it figured out. I brought it inside to warm up over night. refilled the coolant added some Napa Cool (it's all we have here) and let it warm up. took it out for about an half hour with heater on high to circulate the water, then noticed some steem again. It was the cap on the radiator...
  12. V

    T-Stat Question

    I'm an idiot. I'm gonna pull it in the shop tomorrow and thaw it out. Run some car quest low silicate antifreeze in it and hopefully that will solve my problem. I'm a dumb A@#. Thanks for the help.
  13. V

    T-Stat Question

    Yeah It's been pretty cold out here, 5 to 15 above sub 0 at night. I never thought of that. When I bought the truck I never thought of checking the coolent. I guess I always assumed the person who had it knew what they were doing. And as soon as I saw it over heat I shut it down. so it may have...
  14. V

    T-Stat Question

    I've been doing a lot of reading on thermostat replacement and I'm a little confused or ignorant. I was reading that out 7.3IDI's have a bypass, what does that mean, if the T-stat sticks, it will by pass the T-stat to keep coolant flow , if so. My truck over heated today. It was working fine the...
  15. V

    Needing some parts?

    I"ve been putting things off long enough thinking I could get away with it a little while longer to get some extra cash, however with the holidays here its a loosing battle. I'm looking for a few parts hopefully I can get them from some of you on here a littel cheaper then at the parts store...
  16. V

    ARB Air Compressor

    That will work, thanks I'm excited to see how it's goon work. should be pretty bad ass.
  17. V

    ARB Air Compressor

    Does anyone have a diagram on how to install the ARB 12 vold 20 amp older style compressor for air lockers. I'd post a pic of the one I have but don't know how, would appreciat help, thanks
  18. V

    i know, theres other posts out there, BEST N/A muffler?

    How would a stock cummins 12 valve exhaust without the cat sound. My buddy just put stacks on his and I took the origional exhaust with everyting on it. I plan on cutting off the cat but using the muffler with a 4" turn out. What do you think? I do plan on installing my sidewinder turbo, but for...
  19. V

    Hydraulic Oil in Transfer Case

    Thanks for the reply, thats kind of what i figured but wanted to see if anyones done it, so its next on my list..thanks again
  20. V

    Hydraulic Oil in Transfer Case

    Hey guys, was wondering if I could drain my transfer case of ATF and fill it with hydraulic oil. From what I hear the seal on the output side of the TC is know for spitting fluid out and unless we check every day we won't know until its to late, I know HF is a little thicker but will it work and...
  21. V

    Fuel filter housing leak

    I have the same problem, I thought I would need to get a whole new filter head but an O-ring is a pretty simple fix, and a lot cheaper. Thanks also.
  22. V

    Serial Number

    Thanks for the response, but there is no 7.3 in front of the numbers anywhere. Owell, Thanks again
  23. V

    Serial Number

    I was told when I got the truck it had a crate 6.9 that replaced the 7.3 that was in it. It's a 1991 F250 4x4 with a T5. There are no stickers anywhere on the engine telling what it is. It does have the 1/2 head bolts so I want to say it's a 7.3 but it also has a after market turbo so I don't...
  24. V

    Has power but wont turn over won't cycle GP

    Thanks for the input, I won't get to it today other prioritys but i'm going to try and tackle it in the morning when I get off of work. Yeah I work nigts.
  25. V

    Want to Make sure

    My transmission has been shifting very hard and late for the past couple of days. It's been happening every since my breaks got hard as a rock. I guessing my Vac pump is shot. My breaks were giving me problems since I've had my truck they would be hared then they would be soft or vice versa...

Latest posts

Forum statistics

Threads
91,389
Posts
1,131,710
Members
24,200
Latest member
Faust

Members online

Total: 303 (members: 7, guests: 296)

Share this page

Top