Recent content by Sidewinded_idi

  1. Sidewinded_idi

    So What Did You Do With Your PSD Today?

    Yes, I got my EMT license and start my fire academy January 10th, so I won’t have time for any side work unfortunately.
  2. Sidewinded_idi

    So What Did You Do With Your PSD Today?

    Only thing I miss is running th wmo, I’ve stopped doing it with this truck as it was just too finickity on viscosity. I’d have to be dead on the money for it not to haze. The idi I didn’t even use a hydrometer just a simple 80/20 mix and it drank it all day.
  3. Sidewinded_idi

    So What Did You Do With Your PSD Today?

    Thanks! Love this site but the dang powerstroke has been so reliable I haven’t needed such a resource. The idi I read every page on this forum just to learn the truck. I still miss my 92 quite a bit but it’s hard to beat this newer truck with such good brakes and a 140$ programmer that lets me...
  4. Sidewinded_idi

    So What Did You Do With Your PSD Today?

    Been busy, using my truck a lot for hauling, but just finished up getting my medical license and going into fire so I won’t be using it anymore in that way. I put it back into truck mode removed the bed tank and 19.5’s and put on military 37’s (free), still pulls the goosneck great and moved...
  5. Sidewinded_idi

    Looking at a truck tonight. Opinions?

    See it when it’s cold, if it starts good then send it. I’d look for the big things, take the oil cap off and smell for any burnt electrical smell, smell the coolant. If any diesel smellin the coolant pass. And if it has atune make sure it has an egt gauge otherwise pass
  6. Sidewinded_idi

    looking to get back into the WMO life

    Wow that came out wrong! Meant to say a hydrometer.
  7. Sidewinded_idi

    Is a turbo mandatory for fuel economy?

    For what it’s worth my 92 idi with the 7.3 and banks sidewinder kit did great empty. I hauled a car to la and averaged 17mpg. When I installed the 4.10 rear ended if I kept my speed to 55 I would get 22-23 consistently.
  8. Sidewinded_idi

    Two questions that may be related

    You could’ve used your timing housing. The breather port for your turbo comes off it’s just rtved where the stock plate cover is.
  9. Sidewinded_idi

    Buying a IDI Turbo. What do I look for?

    Lol it was very clear! Idk where you got that from
  10. Sidewinded_idi

    So what did you do with your truck today?

    I would pull your oil cooler and check your relief valve. My trucks oil pressure gauge was in the turbo feed line and I had good pressure. It would be about 7 at hot idle. When the oil cooler was changed it was back up to 10+ at idle but all from the turbo feed. That was even with the same feed...
  11. Sidewinded_idi

    19.5 wheel

    I keep 110psi in my 225/70 and even unloaded it drives great. I have zero complaints with them. Although off highway traction does suffer. But weighted down the handling and stability is worth every penny
  12. Sidewinded_idi

    Zf5 cross reference between IDI and psd.

    Yes again what you have is a cab and chassis f350. So the frame is completely different aswell as the leaf springs and rear axle. Like stated a regular Truck bed won’t fit and neither would a regular axle or leaf springs
  13. Sidewinded_idi

    Alternative diesel fuel

    Your also giving advice on biofuel to a man running wmo as indicated in the first post. Just trying to advise you do heed your words. I don’t give advice on biofuel as I’m not familiar. You should do the same to people running wmo
  14. Sidewinded_idi

    Alternative diesel fuel

    No it wouldn’t. The excess particles in dirty wmo will build up in the prechambers. Seen it firsthand many times.And we’re talking about wmo, you seem to be unfamiliar with it as your referencing biofuel. Two completely different processes. I haul heavy equipment for a living all on wmo so I’ll...
  15. Sidewinded_idi

    Alternative diesel fuel

    Thanks, I’ll nominate to have the poster above send me his 1 micron filtered oil and process it for free through my tank and show you what I pull!
See more

Latest posts

Forum statistics

Threads
91,316
Posts
1,130,202
Members
24,121
Latest member
720Diesel

Members online

Total: 837 (members: 8, guests: 829)

Share this page

Top