screwhead's latest activity
-
Sscrewhead reacted to IDIBRONCO's post in the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else with
Like.
I thought it was just because someone didn't like their alternator belt at idle, but KansasIDI may be right. I've used a wire wheel on... -
Sscrewhead reacted to Old Goat's post in the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else with Like.
When you spread gravel on that hill, do it going down hill. Doing it going up hill, you might be looking at blue sky through the...
-
Sscrewhead reacted to SkylabTech86IDI's post in the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else with Like.
If you’re ever in the South East VA section of the state, then I have a complete DTI timing Kit available to use for timing. FWIW I...
-
Sscrewhead reacted to crazydane's post in the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else with Like.
Been talking to some junk yards and machine shops today. Found 3 complete engines within 50 miles in unknown conditions for around $500...
-
Sscrewhead reacted to XOLATEM's post in the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else with Like.
Do you have a drip pan for your engine stand..? If not...I belief Summit Racing Equipment could fix you up...helps keep the potential...
-
Sscrewhead reacted to Nero's post in the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else with Like.
Jesus... Some people shouldn't be allowed to wire things.
-
Sscrewhead reacted to IDIBRONCO's post in the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else with Like.
I haven't done a compression test on one of these, but that's where I did the leak down tests at. I'm pretty sure that's where you do...
-
Sscrewhead reacted to crazydane's post in the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else with Like.
@IDIBRONCO Good deal on it likely not being pin holes due to cavitation damage being that it was cylinders 5 and 7 that had coolant in...
-
Sscrewhead reacted to Nero's post in the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else with Like.
You are in fact missing the cowl seal. It screws to the cowl panel itself. So what's your plan? Gonna try and run it or are you yarding...
-
SThe best part of having a D44 front end is that you can turn around in about 1/3 the distance that it takes a D50 truck to turn around...
-
S12pt 5/16
-
Sscrewhead replied to the thread Spindle Nut Socket Size?.This one worked for me. Size is 2 5/8th 4 lug part #: pt w83010...
