Recent content by johnnolanstrtgld

  1. J

    Texas IDI Roundup- Dyno day and Show & Shine

    Man. I wish I lived closer... Seems like a cool event and I would love to see that bull nose.
  2. J

    Think it’s worth it

    yup. it would be a lot more here. as long as it will start and you can hear it run and the title is in order seems like you cant lose.
  3. J

    Engine swap

    I would probably pull the engine to do the head. You could get the head checked and if its bad do the swap. Which engine is lower miles?
  4. J

    Question for the gurus re:surging

    I had this issue and it tured out to be plugged fuel filter and water seperator(racor filter). After replacing the surging went away.
  5. J

    What's a clean E350 non-turbo van worth.

    What is a certified 4x4 conversion?
  6. J

    Parasidic Draw on my 1989 F-350 with the 7.3 idi

    the symbol you have circled is a resistor. I think a diode is a triangle with an extra line at the base. as an aside you don't need a ground attached to a bulb. you just need a voltage drop across the bulb. for instance one side could read 12V while the other side could be 6V (not ground)...
  7. J

    Bolt in seat options

    is 40 20 40 considered bench seat that is direct bolt in? wanted the bench with fold doen armrest/cupholder.
  8. J

    Looking for recommendations for the best C6 Tranny rebuild book/CD.

    ATSG. may not be able to get it in print, but they still have pdfs for just about any auto trans.
  9. J

    Is there a trick to remove bed?

    I was thinking it would be easier to lift the bed off. Also it would keep threads from being damaged.
  10. J

    Is there a trick to remove bed?

    Thanks. Then you grind the tack welds and pull the bolts?
  11. J

    Is there a trick to remove bed?

    I'm trying to remove the 6 nuts that hold the bed in, but the round tops just spin. Is there a trick to get these out? I don't want to grind off the heads.
  12. J

    Has this (harmonic balancer) already been sleeved?

    35 bucks at orielly. Napa wanted 55 for a CR branded one. Figured National was fine and 20 bucks less. Cheaper than a new harmonic balancer.
  13. J

    Has this (harmonic balancer) already been sleeved?

    Thanks Towcat. I picked up the part you displayed 99250. Worked like a charm. Thanks again for your help on this. the old one looks like it was the wrong one that the PO tried to install anyway to get it to work. Feel much better about the new one and the installation.
  14. J

    Bought one! Now to drive it 600 miles

    you make it?
  15. J

    Has this (harmonic balancer) already been sleeved?

    I'm working on a 1986 F350 6.9. I've got a front seal leak. I noticed that the seal in the kit I have is slightly smaller than the seal that came out of it. I'm curious is this is one of those sleeve kits, and if the seal with this is a different size. I'm not sure if I should re-sleeve (I...
See more

Latest posts

Forum statistics

Threads
91,348
Posts
1,130,808
Members
24,148
Latest member
Alleycat

Members online

Total: 184 (members: 1, guests: 183)

Share this page

Top