Recent content by IDIn_It

  1. IDIn_It

    Decided to rebuild the IDI

    Since I'm taking apart the motor, do I need to worry about marking the timing on the injector pump at all for reassembly? Or should I go ahead and mark it just in case..... Sent from my SAMSUNG-SM-N915A using Tapatalk
  2. IDIn_It

    Decided to rebuild the IDI

    Compared to the passenger side it was. The passenger side #1 cylinder had rust all in it. Drivers side didn't. The passage from the thermostat was the culprit. Sent from my SAMSUNG-SM-N915A using Tapatalk
  3. IDIn_It

    Decided to rebuild the IDI

    Got some more work done on the engine. Today I got the water pump off, radiator elbow, and drivers side head off. This side was muccchhhhhh cleaner than the passenger side smh. Sent from my SAMSUNG-SM-N915A using Tapatalk
  4. IDIn_It

    Decided to rebuild the IDI

    Thanks for that useful tread. Sent from my SAMSUNG-SM-N915A using Tapatalk
  5. IDIn_It

    Decided to rebuild the IDI

    Not bad at all what else did u replace in the heads? Sent from my SAMSUNG-SM-N915A using Tapatalk
  6. IDIn_It

    Decided to rebuild the IDI

    Sorry about the double triple post. I meant to say retainers not Rockers lol. Sent from my SAMSUNG-SM-N915A using Tapatalk
  7. IDIn_It

    Decided to rebuild the IDI

    Are you running a turbo? I have a 7.3 with factory. 093 ATS turbo so they should have inconel valves right? Those valves and Retainers are like brand new jewelry for the idi!!! Sent from my SAMSUNG-SM-N915A using Tapatalk
  8. IDIn_It

    Decided to rebuild the IDI

    Sent from my SAMSUNG-SM-N915A using Tapatalk
  9. IDIn_It

    Decided to rebuild the IDI

    Are you running a turbo? I have a 7.3 with factory. 093 ATS turbo so they should have inconel valves right? Those valves and Rockers are like brand new jewelry for the idi!!! Sent from my SAMSUNG-SM-N915A using Tapatalk
  10. IDIn_It

    Decided to rebuild the IDI

    That's not bad at all. What was the turn around time for them? Sent from my SAMSUNG-SM-N915A using Tapatalk
  11. IDIn_It

    Decided to rebuild the IDI

    Is that with maching of the heads also? If my valves check out good I may reuse them or are the stock valves cheap enough to go ahead and replace? Sent from my SAMSUNG-SM-N915A using Tapatalk
  12. IDIn_It

    Decided to rebuild the IDI

    If I'm not mistaken, 91dirtydiesel had an N/A 7.3 idi and he fabed up a turbo kit for his. https://youtu.be/Q4glxVLfwOc Sent from my SAMSUNG-SM-N915A using Tapatalk
  13. IDIn_It

    Decided to rebuild the IDI

    I'll have to give my local machine shops a visit then. what would be a rough estimate on head work just wondering. Sent from my SAMSUNG-SM-N915A using Tapatalk
  14. IDIn_It

    Decided to rebuild the IDI

    Forgot to add that I bought another 7.3 idi with a banks sidewinder full turbo kit Installed as a donor truck. I plan on replacing my factory turbo on my 94 with it and using some of the interior and exterior parts off of it. Sent from my SAMSUNG-SM-N915A using Tapatalk
  15. IDIn_It

    Decided to rebuild the IDI

    Thank you thank you!!! I wasn't sure on what to use. As for the condition of the heads and block, what do u think could be done to get things back in order? From what I see, there is no sign of cavitation (hopefully). Sent from my SAMSUNG-SM-N915A using Tapatalk
See more

Latest posts

Forum statistics

Threads
91,344
Posts
1,130,730
Members
24,143
Latest member
Cv axle

Members online

Total: 339 (members: 10, guests: 329)

Share this page

Top