franklin2's latest activity
-
Ffranklin2 replied to the thread Clutch hitting safety switch.To the original thread starter. Here is a picture that shows the switch. The switch in the lower part of the picture is the brake...
-
-
Ffranklin2 replied to the thread Clutch hitting safety switch.I have to drive it everyday to work. What is really bad is I live right near the base on the far side, so every morning whatever...
-
Ffranklin2 replied to the thread Clutch hitting safety switch.Is there a reason you want it to work? After a couple of episodes the past couple of years I am finding I do not like them. 1st...
-
FHe is not a expert and gets small things wrong sometimes, but thought these trucks were significant enough to include on his channel.
-
Ffranklin2 replied to the thread Anyone hotshot trucking in an IDI?.Most of them do not have CDL's. So their combined weight ratings tags, trailer and truck, cannot exceed 26,000. That can be difficult...
-
Ffranklin2 replied to the thread Air shocks.It puts a lot of strain on the frame shock mounts. And they do give a stiff ride when aired up. Here is a set that is supposed to fit...
-
Ffranklin2 replied to the thread Anyone hotshot trucking in an IDI?.It's my impression watching trucking videos lately, that hot shotting as a whole has been declining. Good thing you did not get into...
-
Ffranklin2 replied to the thread Brake lights, continue to not work?.If you have separate amber turns, then ignore my post. Your truck has been re-wired, no one is going to be able to help you without...
-
Ffranklin2 replied to the thread Brake lights, continue to not work?.The problem with the brake lights, they are embedded and use the same wiring and bulbs as the rear turns. So when the brake lights do...
-
Ffranklin2 replied to the thread 1988 f-350 7.3 IDI need help with wiring harness.It only burnt up in the back? That should not be too hard to repair. I am going to redo my wiring back there anyway and mine never...
-
Ffranklin2 replied to the thread Manual swap.I would not swap the column, I would keep your old auto column. I have no problems with using my old auto column. I took the lever off...
-
Ffranklin2 replied to the thread Manual swap.Are you going to get the frontend also? If possible, I would try and at least get the front driveshaft and the front transfer case...
-
Ffranklin2 replied to the thread Manual swap.I did a manual swap on my 89. Your 91 is like my 89, not sure if the pedals will swap. I know 1986-dwn will not swap. I used a 89...
-
Ffranklin2 replied to the thread Glow plug amp draw.https://www.oilburners.net/threads/how-much-voltage-drop-do-should-the-glow-plugs-cause.72240/
-
Ffranklin2 replied to the thread Glow plug amp draw.I think you guys are way low. I seem to remember someone on here long ago did some testing and all of them together was a good bit over...
Latest posts
-
Supply fuel line from fuel filter housing to injection pump- Latest: SkylabTech86IDI
-
-
-
