Recent content by charredsteak

  1. C

    DB2 Pump doesn't respond to full throttle

    Will consider it then, putting it off for the time being. Managed to get most of the power back after rewiring the cold advance to FSS power and retarding the static timing so that she doesn't sound like a can full of rocks lol. Definitely a bandaid, but don't plan on putting too many miles on...
  2. C

    Another E4OD flashing OD light thread

    Innova 3145 was my go to, but if it's reading codes it should be working. Would definitely plug into it once it starts acting up, keep your code reader in the truck or something. Pretty sure EEC doesn't hold on to codes for very long like an OBD system would
  3. C

    DB2 Pump doesn't respond to full throttle

    Looked into Russ, most likely gonna send it out there considering y'all's horror stories with local shops. The face cam was set like you said where it starts to ramp immediately off idle. My understanding is these pumps will naturally add advance as the pump plungers take more of a bite of fuel...
  4. C

    DB2 Pump doesn't respond to full throttle

    Do not have the tool, just messed with the advance until it sounded happy. About half a dime off the mark
  5. C

    DB2 Pump doesn't respond to full throttle

    Used the factory service manual, currently at 67k but definitely rolled over. Don't/didn't have any hot or cold start issues but I'll look into it. Already quoted around $400 for a rebuild if that'd cut it
  6. C

    DB2 Pump doesn't respond to full throttle

    Yeah ran through that already, was a tooth off. Got it timed at the factory mark with no problems
  7. C

    DB2 Pump doesn't respond to full throttle

    First post here, haven't been able to find any threads for this specific issue and none of my buddies can seem to figure it out. Truck ran great up until a couple weeks ago when I pulled the pump out to put new shaft seals in. Doesn't seem like it has full throttle anymore. Took some time to get...
Top