I’ve been looking around at this stuff too as I have a pump or two lying around to test it on... now if only someone with more experience on pumps would chime in. I’m gonna go look at every piece of equipment on our ranch that has a diesel as most have these pumps, and see if one has a top hat...
For as many miles as it had the crosshatch still looked decent, it was amazingly clean on the inside, it seems it was taken very good care of most of its life.
Hey man no obvious internal damage and no sludge at all. I’ve decided to keep it a 7.3 bore but the machinist insists on putting sleeves in it. And checking every clearance 5 times over because it blew the frost plug out in such a weird spot.
A little update, things have been going very slowly with my babygirl being born and then getting laid off because of this virus bs. However, I did pick up a set of some R&D rails. I’m working on boxing and coating the frame as well as new cab mounts. I’m waiting until things settle down a little...
Yes the cover needs to come off anyway to do the front main. I would just do that since you’ll be fixing two things in one go rather than putting it back together and finding out that sealer stuff doesn’t do the job on these positive crankcase pressure loving beasts.
While that is quite the dilemma for you guys with trucks that have the trans or married tcase speedo drives, I have a divorced NP205 and the speedo is driven off the output of that. So for me the only big hurdle is this whole input shaft spacing issue.
I know this is SOOO old and there might be newer threads on this but this is all that came up when I was searching. As for why I brought this up, I plan on replacing my zf5 in the highboy with a s6-650 zf6 and from a parts truck. I read the write up and how the guy built the custom adapter just...
I had these same symptoms on my 6.9 that I stuffed in my 75 ford. Only reason I knew where to look is when I got the engine it had two head bolts missing, so it was always a concern for me that it might blow out right there. I even studded it before I put it in my truck, but I didn’t have the...
https://www.mddistributorsstore.com/item/issr8585m/isspro-tach-3-3/8-4-k-no-hrs/1.html
Got one of these in my 75 works great. As you can see it’s got the same color code as our factory tach (green and black from the sensor and red and black to power the tach) wiring so just match the wires, set...
Remember how I was saying that it’s usually the young guys asking that price? Well I’m pretty sure that’s from a family around here and one of the grandkids is trying to get every dime he can from it. They also recently sold a 65 f-250 428 with a 5spd overdrive Clark and divorced np205 for...
Gotta love these old fords with IDI’s. My boss at the local used car dealership I work at is just amazed at the fact that I’m not spending 40 dollars a day anymore on gas. And he was around when these trucks were new so to see how it preforms now makes him wonder why ford never put diesels in...
Thanks you guys. Unfortunately this morning doing some more looking it appears I may have a burnt exhaust valve, there was a few times I let the egts get a little hot so that makes sense for the “ash” I’ll call it. That’s kind of how it feels and acts like once you scrape it of. But you can...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.