gnathv
Latest activity Postings About
-
-
gnathv replied to the thread Which ts chip, or am i overthinking?.I would look at PHP Hydra before deciding. -
gnathv replied to the thread Charging question.Classic diesel designs has a set on his site.
-
gnathv replied to the thread Charging question.Clean the ground connection at the frame on the lower voltage battery also.
-
gnathv replied to the thread Hypermax Exhaust.I took the exhaust off of a 1997 powerstroke and put it on a 1993 IDI. Everything lined up.
-
gnathv replied to the thread What wheels are these?.Factory Alcoa
-
-
gnathv replied to the thread High pyrometer readings on 6.9L IDIT.Put a temperature probe under your hood and you’ll discover that at speed your under hood temp is the same as outside temperature...
-
gnathv replied to the thread High pyrometer readings on 6.9L IDIT.What temps are you seeing?
-
gnathv replied to the thread Could it be the glow plug selonoid?.The voltage shouldn’t be more than 1 1/2v. 1 1/2v would be contacts beginning to pit.
-
gnathv replied to the thread 7.3 Powerstroke/6.0 Powerstroke Vaccuum Pump.The powerstroke and idi both had serpentine pulleys but one was 7 ribs and the other is 8 ribs. If you use an 8 rib belt on a 7 rib...
-
gnathv replied to the thread Could it be the glow plug selonoid?.Check the voltage drop across the glow plug relay. With a voltmeter set to dc, put the leads a the two large lugs on the relay. Have...
-
gnathv replied to the thread 7.3 Powerstroke/6.0 Powerstroke Vaccuum Pump.I put a 96 powerstroke pump on my 93 IDI. It did fit and worked. It’s been 10 years ago so it’s a little fuzzy. There was something...
-
gnathv replied to the thread So what did you do with your truck today?.I have one of those on my truck and recently my high beams stopped working. What I found was the wires in the headlight socket would...
-
gnathv replied to the thread So what did you do with your truck today?.Did you swap the relays to verify they both work?
-
gnathv replied to the thread Any concern with these compression numbers?.The way I’ve timed by ear was to jumper the cold advance and move timing until it clattered and would quiet down when I removed jumper...
-
-
Loading…
-
Loading…
