Kevin 007
Latest activity Postings About
-
-
Kevin 007 replied to the thread High pressure fuel pumps.I would go Bosch 7.3 powerstroke lift pump (which tend to have a long life) and a regulator. -
Kevin 007 reacted to mblaney's post in the thread Holley Red are garbage, what else quickly? with
Like.
+1 on the Walbro. I have been running mine for years and never a problem. I also recommend pinching down the fuel return at the fuel... -
Kevin 007 reacted to MadMac's post in the thread Another good reason to stay out of Calif. with Like.
I might not agree with CARB, its methods, the restrictions or whatever. That said - it is very difficult to argue with the results. I...
-
Kevin 007 reacted to Poppasmurph's post in the thread 7.3 idi factory turbo best way to seal up-pipe with Like.
Old thread I know but.....but autobody steel wool......take a pad and gently pull it apart untill you have a long mess of steel wool...
-
Kevin 007 replied to the thread Valve Stem Seals.Installing comp 910's for the first time on a turboed 6.9. And since the umbrella seals on the exhaust don't fit right with the 910s, I...
-
If there was a blueprint of this I'd definitely be willing to make one.
-
I would have to side with your dad on this one although they're probably both right to a degree. Ask Idiot. I believe that he has used...
-
Interesting points. Trying to understand your logic a bit better. Do we both agree that a vacuum is created on earth because there is a...
-
Agreed - I’ve done an IDI no exhaust seals and it was no concern. Also have similar thoughts to you on the guides but I don’t have a...
-
Kevin 007 replied to the thread Valve Stem Seals.And many of us, including myself; see less guide wear in 6.9's. Only thing that makes sense is the looser/non existent valve seals.
-
That's what I've contemplated doing. So long as the guide-valve clearance is correct, it will be minimal. These engines seem to chew...
-
Easy way to prove it to yourself is install a vacuum gauge on the intake manifold of a diesel and see what you read. Vacuum is created...
-
GUYS...how does the air get into the cylinders...?? Every time an intake valve is open and an exhaust valve is closed and the piston...
-
I installed positive seals on all of the valves, posted on the IDI FB group with the same question, Justin at IDI Performance said it's...
-
Kevin 007 replied to the thread Valve Stem Seals.Following. Did you come up with anything. Im a fan of the umbrella type but as you say, they don't fit well under the Comp 910's. I...
-
-
Loading…
-
Loading…
