79jasper
Chickenhawk
Yeah. That's the mount.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Sent from my SAMSUNG-SM-G935A using Tapatalk
I cannot catch a break
- Thread starter laserjock
- Start date
You must have been running it before with that broken mount. Don't be paranoid, have it welded up. If your buddy can half assed weld it, probably be golden.
F350camper
BOOST!
I say have him give it a go Mike. You really have nothing to lose. Even if you run it and its less than perfect, swapping in a fully fresh zf at some future date isnt any big deal. As opposed to making a fresh ZF part of this phase of the build.
just my 2 red cents.
just my 2 red cents.
Is it a whole case or just the back half Calvin?
either all or part is ok with me.
I would run it as is or do Shawn's idea. That corrosion in the crack will cause all billy hell to weld, if it goes deep enough pretty soon there is no material to work with.
As it is it will sit there and work for years unless yo jump the truck.
Remember, there is no torque there ,mainly compression load.
As it is it will sit there and work for years unless yo jump the truck.
Remember, there is no torque there ,mainly compression load.
ifrythings
Full Access Member
Look for a crack here too, it's a very common area to crack, I've heard 460 guys breaking the ears off easily too, just not enough meat there.
You must be registered for see images attach
Garbage_Mechan
Garbage Mechanic
X2
