If you have no voltage to either wire in the plug,it cant be charging.one wire goes to the light.the other should have power with the key on.
Did you wire the new plug correctly?
Did you wire the new plug correctly?
Battery Light On
- Thread starter Joe83
- Start date
Joe83
Registered User
Found it... Blown fuse under the hood.
I swear I checked all of those fuses 37teen times throughout the day...
Also found a fuel leak at the fuel filter housing, fixed that and stopped what I thought was a rear main oil leak...
Thank you guys for all of your help!!!!!!!!!
This message board is awesome indeed!
Thanks again.
Sent from my iPhone using Tapatalk
I swear I checked all of those fuses 37teen times throughout the day...
Also found a fuel leak at the fuel filter housing, fixed that and stopped what I thought was a rear main oil leak...
Thank you guys for all of your help!!!!!!!!!
This message board is awesome indeed!
Thanks again.
Sent from my iPhone using Tapatalk
79jasper
Chickenhawk
Good deal. Sometimes a bad fuse can slip by. Especially when there's three thousand of the things. Lol
Edit: makes me think something else could still be at fault. If the fuse was bad, shouldn't it have failed the test?
Sent from my SAMSUNG-SM-G890A using Tapatalk
Edit: makes me think something else could still be at fault. If the fuse was bad, shouldn't it have failed the test?
Sent from my SAMSUNG-SM-G890A using Tapatalk
Joe83
Registered User
Both alternators passed a bench test.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Yeah, I'll bet it was fuse #6 a 10 amp fuse.
When I posted that other circuit diagram, I was going to tell you to check that one, but forgot. But being 87 next week, my attention span is short.
79jasper
Chickenhawk
Ah, okay. Well that makes sense then.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sent from my SAMSUNG-SM-G890A using Tapatalk
Joe83
Registered User
The ******** light is back on!
All fuses are good.
Sent from my iPhone using Tapatalk
All fuses are good.
Sent from my iPhone using Tapatalk
Joe83
Registered User
I only have 2 wires going to the regulator. Both are light green/red.
One lights my test light up very bright, the other very dim.
Probably a bad wire?
Sent from my iPhone using Tapatalk
One lights my test light up very bright, the other very dim.
Probably a bad wire?
Sent from my iPhone using Tapatalk
Similar threads
