eastsideauto
Full Access Member
Was ther ever a non-slip yoke t-case behind an IDI? Which non-slip t-case can be swapped in?
transfer case ????????
- Thread starter eastsideauto
- Start date
jaluhn83
Full Access Member
1345 will bolt up, that was stock 80-86. Later 1356 cases are fixed too, but I think they're harder to find.
FYI, the t-cases are the same bolt pattern for all 80-96 trucks, so you can put pretty much anything on there.
FYI, the t-cases are the same bolt pattern for all 80-96 trucks, so you can put pretty much anything on there.
riotwarrior
Full Access Member
Yes...CC long box and IIRC SC LB as well...the drive shaft is a two piece and uses a fixed tcase yoke
Any from the above group or a Bronco one with fixed yoke too. Or a 205 or 203 for that matter if you wanted a 203..
You will need a custom rear shaft for sure if you do not already have a fixed yoke setup....
eastsideauto
Full Access Member
My truck has a slip yoke case in it now.
justinray
Contributor
Whats the benefit to a fixed yoke?
gonecrazyi
Full Access Member
Most of the fixed yoke 1356s I have seen were on broncos and crew cab f250s from 96/97. But there are always oddball combinations that have had them.
Similar threads
Latest posts
-
-
Help....Need a New Diesel Filler Neck for the MidShip/Side Tank
- Latest: Ole BlackBetty
-
-
-
How to measure valve stem to rocker arm pad clearance?
- Latest: 8769bigred