GunnerJ
Full Access Member
My google-fu isn't up to ***** and I'm having a hard time finding the whole list of parts needed to swap Superduty springs onto my truck for a lift kit. All help is appreciated.
Superduty spring swap
- Thread starter GunnerJ
- Start date
leojr
Full Access Member
What do you have now? (Truck wise...)
GunnerJ
Full Access Member
The truck in my sig, a 93 f250 idi ex cab manual 4x4
Sent from my VS985 4G using Tapatalk
Sent from my VS985 4G using Tapatalk
without a straight axle swap, it wont do you much good.
GunnerJ
Full Access Member
I was worried about that, maybe one day
Sent from my VS985 4G using Tapatalk
Sent from my VS985 4G using Tapatalk
leojr
Full Access Member
The rears are almost a direct bolt it. A hole in the frame mount and I think in the shackle needs to be enlarged. In my opinion this is a worthwhile effort even if you don't do the front solid axle swap yet. Superduty B codes are what I used. I was amazed that I could move the suspension my standing on the rear bumper. If you do a lot of hauling or towing you may want to explore stiffer springs than the B, but I don't have much information to help you with this. Ask for Junior at atssprings.com
