looking to spend around 1k - 1500 on a engine. perferablly a runner, but if the price is right, ill take something that needs rebuilt.
WTB: 96-97 PSD 7.3 complete engine- centeral California
- Thread starter IDIoit
- Start date
i have a runner with an affinity for consumption of motor oil. 
'99 motor. no injectors included.
sitting on cart. slowly getting parts robbed off of it.
offers considered.
'99 motor. no injectors included.
sitting on cart. slowly getting parts robbed off of it.
offers considered.
i have a runner with an affinity for consumption of motor oil.
'99 motor. no injectors included.
sitting on cart. slowly getting parts robbed off of it.
offers considered.
that would be awesome for a rebuild on my 01
what HPOP does it have?. got a production date?
may take you up on that if i dont find a 97 runner.
my situation is calling for a 97 tho.
i have everything to support them, this is for my twin engined boat.
so if i change all of the HPOP, id have to buy another..lol
i want both engines exactly the same.
i have 2, but ones in my ranchero.
both cali blue lable engines.
i wonder if my 97 harness for the chero will work on the 99
hmmmmm
if the HPOP was still on there, it is the 17* HPOP.
the '99 uses the single connector UVCH whereas the '95-'97 uses the two connector UVCH.
IIRC, those are the only 2 differences, well that and the turbo they used.
i know for a fact that the heads are the same casting numbers.
and the plentums can be swapped.
i know for a fact that the heads are the same casting numbers.
and the plentums can be swapped.
the plenums were robbed too.
i bought a unwanted E350 to repower a F450. outside of the long block, everything else had to be swapped over.
