corliss010492
Registered User
i have a international 4200 with a vt365. the truck will not start(unless sprayed with starting fluid and it will start and run fine) the most injection pressure i can get is 480psi. ive tried unplugging the icp and that does do anything, and it has a new ipr. can i high pressure oil leak cause this or is it most likely a hpop. i was am going to air test it just wanted some input. and also the truck does have one code for injector 4 circuit,i believe it is code 454. could this all be something with the computer causing this or could it be two separate problems. any input or help would be great. thanks