f250 front brake rotor removal?

GREASE FIRE · Aug 14, 2011

are there any pictures on this forum of how to remove the front brake rotors on a 4X4 f250?
i started off today just planning to replace pads but now i find the caliper and rotor on one side are both shot and i can not figure out how to remove the rotor. any help greatly appreciated!
thanks,
Paul

brdmh44 · Aug 14, 2011

This is from another forum, but should point you in the right direction. The next time I do brakes on a 4x4 Ford I will write up a tech article.

Please let us know if we can help you in any other way.

http://www.thedieselstop.com/forums/f28/96-f250-rotor-removal-231394/

Good luck!

hairyboxnoogle · Aug 14, 2011

pull the wheel, pull the caliper, take the hub off, use an air hammer to knock the wheel studs out and it should come off with light persuasion. That is if im remembering the right front end, been a while.

robmoore11 · Aug 14, 2011

thats exactly how it works.

1.take caliper off.
2. take out allen bolts on outside of hub.
3. remove clip, it is one of those annoying ones that you have to use a screwdriver to get out.
4. there are special nuts that you are supposed to use a special tool for but i just used a small hammer and a flathead screwdriver. there may be c clips before or after i cant remember.

steps may be a little off its been a while since i did my brakes. but i would get a c clip remover tool. for inner and outer.

You must be registered for see images

f250 front brake rotor removal?

GREASE FIRE

Full Access Member

brdmh44

Midwest Chopper

hairyboxnoogle

Full Access Member

robmoore11

Full Access Member

Similar threads

Latest posts

Forum statistics

Members online

Share this page