Latest activity
-
ROCK HARVEY replied to the thread SMF Clutch kit.I run Redline MTL in mine. I didn’t notice a difference in rollover noise going from ATF to MTL. I don’t over-fill though, so I can’t... -
Also feel free to message me about it, there is cheaper options for the fuel pump. One that i have been running for over a year now that... -
SouthernIDI replied to the thread E-Fuel DIY (Regulated High Pressure).Also feel free to message me about it, there is cheaper options for the fuel pump. One that i have been running for over a year now that... -
SouthernIDI replied to the thread E-Fuel DIY (Regulated High Pressure).It is possible to still use the stock selector valve, you would just need to find the proper fittings, and i would suggest running a...
-
SouthernIDI replied to the thread Holley Red are garbage, what else quickly?.1. Nope, I still have the filter head mounted on the engine also, but i built a bracket off to the left of the alternator and relocated...
-
MI'd be inclined to run some thicker/better oil in the ZF5. Maybe overfill thru the shifter opening (like us dodge getrag guys have to.)...
-
hacked89 replied to the thread High pressure fuel pumps.Thanks that’s not my truck but what I’ve done on vehicles is take a weld in receiver tube, cut to length and then you can weld it how... -
u2slow replied to the thread SMF Clutch kit.I'd be inclined to run some thicker/better oil in the ZF5. Maybe overfill thru the shifter opening (like us dodge getrag guys have to.)... -
Wwyndnra1n replied to the thread 7.3 New in box MAHLE Pistons.Sold!
-
KansasIDI replied to the thread Someone go get it!!!.It’s this same truck, was mentioned in the thread titled, ‘Somebody better buy this truck’ -
KansasIDI replied to the thread Someone go get it!!!.https://www.facebook.com/marketplace/item/946606930202340/ A friend of mine used to own this truck. I might go check it out tomorrow...
-
DumpTruck replied to the thread Oil and coolant mixing.Thanks to all for the advice . I will be pulling the oil cooler as soon as I can . I sincerely hope it is the oil cooler . I definitely... -
MMattbo replied to the thread SMF Clutch kit.Has anyone filled from the shift boot to reduce the noise or is that a myth? I’ll be dropping the ZF5 this week to inspect everything...
-
MSame as IDIBRONCO, I only hear the rollover noise when I’m in gear and moving slowly, below 1200 RPM or so. Pretty much just parking...
-
Same as IDIBRONCO, I only hear the rollover noise when I’m in gear and moving slowly, below 1200 RPM or so. Pretty much just parking...
