Latest activity

What's new New posts New resources Latest activity
  • S
    screwhead reacted to 264WSM's post in the thread Zf5 fluid with Like Like.
    The book calls for ATF synthetic. This is usually 10w or 15w oil. Using a light oil like this helps with your fuel mileage, but is not...
  • S
    screwhead reacted to towcat's post in the thread Proper fluid in the ZF 5 Speed with Like Like.
    here's the definitive guide to ZF lube requirements.......(POKE HERE) when you are done reading this you should be throughly confused...
  • S
    screwhead reacted to gatorman21218's post in the thread zf 5 question with Like Like.
    when i'm down shifting, mine hardly will let me grab second until ive slowed way down. it screams until for 2-3 seconds before popping...
  • rreegg
    rreegg reacted to Nero's post in the thread Cleaning fluid related tools with Like Like.
    The plastic mightyvac I had didnt last long. Mac tools offered a solid aluminum one that not only had vacuum, but a reversing dial to do...
  • rreegg
    rreegg reacted to IDIBRONCO's post in the thread Cleaning fluid related tools with Like Like.
    I've had pretty good luck with my Harbor Freight bleeder. I thought it went bad because it quit pulling out the old brake fluid...
  • rreegg
    rreegg reacted to Booyah45828's post in the thread Cleaning fluid related tools with Like Like.
    I've had good luck with our units. They're usually good for a few years, and are only tossed because of damage(stupid users), not...
  • rreegg
    rreegg reacted to Booyah45828's post in the thread Cleaning fluid related tools with Like Like.
    I've got a few vacuum bleeders/fluid extractors. Brake fluid is cleaned up easily enough by soap and hot water, then I let it air dry...
  • S
    screwhead reacted to franklin2's post in the thread zf 5 question with Like Like.
    This is what I am talking about; Go out and start your truck out in 1st gear and wind it up to around 2500 rpm, and then quickly drop...
  • S
    sieg01 replied to the thread Best radiator hose clamp?.
    I like these clamps because they do their job equal and you can tighten them more. Extra nut may not be necessary. But since the bolt is...
  • S
    screwhead reacted to icanfixall's post in the thread Timing question for high altitude with Like Like.
    Thats good information. When I rent out my timing meters I suggest timing these engines to several differnt degrees of advance. Its...
  • S
    sieg01 replied to the thread Powerstroke 2 IDI no Turbo conversion.
    My idea is to rescue the broken IDI engine. I have no intention to go with HEUI. I want to stay mechanical. My problem is just, that it...
  • O
    Old Goat replied to the thread Best radiator hose clamp?.
    My 82 Datsun 720 KC had the OM 300ZX clamps when I bought it new. Never had a leak problem with them. Goat
  • ROCK HARVEY
    ROCK HARVEY reacted to Cubey's post in the thread Best radiator hose clamp? with Like Like.
    Pesky worm gear clamp on the lower radiator hose at the radiator kept working loose. I happened to be at Harbor Freight and saw these...
  • O
    Old Goat replied to the thread Rear main seal replacement.
    Hacked89 did have a good YT Video of installing the Real Main. Guess he took it down. I watched it several times before I installed the...
  • O
    Old Goat reacted to IDIBRONCO's post in the thread Rear main seal replacement with Like Like.
    This is why I like to use a thin coat of RTV on both sides of most gaskets. It makes clean up SOOO easy the next time. The old gasket...
Show older items

Latest posts

Forum statistics

Threads
91,280
Posts
1,129,728
Members
24,098
Latest member
William88

Members online

Total: 441 (members: 5, guests: 436)

Share this page

Top